It depends on the fixture type, the condition of your existing wiring, and whether the junction box needs upgrading. A straightforward fixture swap — removing the old unit and connecting a new one to existing wiring — is the most affordable option and can often be quoted over the phone. Chandelier installations, new fixture locations that require running wire, and recessed lighting layouts are more involved and priced after an on-site assessment. We give you a written estimate before work begins so there are no surprises. No trip charge for Vienna, McLean, Oakton, Tysons, or Fairfax.

A small, lightweight chandelier (under 35 lbs) on an existing junction box is technically a DIY swap if you’re comfortable turning off the breaker, testing with a voltage tester, and matching wires. But most chandeliers worth calling “chandeliers” weigh 50-200+ lbs and require a fan-rated or heavy-duty junction box secured to ceiling joists — not just drywall anchors. Two-story foyer installations add height risk and typically need two people plus scaffolding. If the fixture is heavy, the ceiling is high, or you’re uncertain about the box rating, hire a licensed electrician. The cost of doing it right is far less than repairing a fallen fixture.

A simple fixture swap — removing the old unit and connecting a new one to existing wiring with a standard junction box — takes 30-60 minutes per fixture. Chandelier installations and new-location installs (where we run wire, install a junction box, and add a switch) take 2-3 hours. Recessed lighting layouts with 6-8 fixtures plus a dimmer take half a day. If you’re scheduling multiple fixtures in one visit, we can usually knock out 3-5 simple swaps in a single morning. We confirm the time estimate before we arrive so you know what to expect.

Yes. Adding a new ceiling light where none existed means running wire from the nearest circuit to the new location, cutting a hole in the ceiling, installing a junction box, and connecting the fixture. If there’s attic access above the ceiling, the job is straightforward — we run Romex through the attic and drop it to the new box. If the ceiling is finished with no access above (common in Vienna’s two-story colonials), we fish wire through wall cavities or run surface conduit. Either way, it’s permitted work in Fairfax County and typically requires an electrical permit filed through the PLUS system.

For a straightforward fixture replacement — swapping one fixture for another on existing wiring with no new circuits — a permit is typically not required in Fairfax County. When the job involves running new wire, adding a new circuit, or installing a fixture where none existed before, an electrical permit is required through Fairfax County’s PLUS system. Vienna is one of two Fairfax County towns that also requires a separate Town of Vienna approval uploaded to the same PLUS record. We handle the permit paperwork when it’s needed and factor it into the timeline. If you’re also upgrading your electrical panel in Vienna as part of the project, the permit covers both.

Yes — we install customer-supplied fixtures every week. You pick the fixture from Home Depot, Wayfair, Restoration Hardware, Amazon, or anywhere else; we install it. We work with any brand, any style, and any weight class. Just make sure the fixture arrives with its mounting hardware, wire connectors, and installation instructions. If parts are missing or the fixture isn’t UL-listed for its intended location (wet-rated for outdoor, damp-rated for bathrooms), we’ll flag it before we start so you’re not surprised mid-install. Buying the fixture yourself and hiring us to install it is the most common way Vienna homeowners handle this.

A standard junction box is rated for roughly 35-50 lbs of static weight — enough for a typical flush-mount or small pendant. A fan-rated box (sometimes called a “fan brace box”) is engineered to handle both heavier weight (up to 70+ lbs, depending on the model) and the continuous vibration that ceiling fans produce. NEC code requires a fan-rated box for ceiling fans and any fixture heavy enough to exceed the standard box’s rating. For large chandeliers that exceed even fan-rated limits, we install a heavy-duty mounting bracket bolted directly to ceiling joists. We check the box before every installation — if it needs upgrading, we replace it as part of the job.

Yes. Recessed (can) lighting is one of the most popular upgrade requests we get from Vienna homeowners — especially in kitchens, living rooms, and finished basements. We use IC-rated housings (insulation-contact rated) so the cans can sit against attic insulation without creating a fire hazard. We lay out the fixture positions to light the room evenly — not the builder-grade pattern that clusters lights near walls and leaves the center dim. Every recessed layout includes a compatible dimmer switch. We price recessed lighting per layout (number of fixtures plus the dimmer) and give you a written estimate after measuring the room.